| When
using a GPRS alarm transmission system such as Secure-Com,
your Central Monitoring Station has much greater confidence.
Fully redundant Dual IP GPRS paths makes sure all signals will get through everytime.
Multi-path, Dual Path and Multiple Control rooms.
-
More than one type of communications path available for
alarm
-
If one path is unavailable, the alarm can be sent on
an alternative path these paths might include PSTN (land
line), GPRS, RadioNet etc.
-
Dual Path monitoring which means that the signal from the alarm panel will be sent from the PSTN line and GPRS unit at the same time together.
-
The Secure-Com unit can be monitored by up to 4 control rooms simultaneously.
-
Greater confidence that all alarms will be sent to your
Central Monitoring Station
-
When the phone line is cut the alarm will still get to
the monitoring station
What does a polled system mean?
-
Secure-Com in the monitored premises reports to the Monitoring
Station on a regular basis (e.g. every 90 seconds)
-
Information that your alarm panel and alarm transmission
equipment is functioning correctly (equipment integrity)
-
The best polled path systems use acknowledge polls so
that both ends are sure the path is available and all equipment
is working correctly.
What are the benefits of Secure-Com?
-
Secure transmission of alarms
-
Encrypted communications better than 256 bit AES
-
Two forms of authentication before the Secure-Com is
accepted by the Network
-
The Secure-Com unit runs on RadioNet Monitoring's own GPRS
VPN Network in conjunction with the Optus and Vodafone Network
-
All communications are acknowledged , Alarms, system faults,
polls
-
Protection against Hacking
-
Multiple Communication Paths
-
Up to 4 possible communications paths for the transmission
of alarms, GPRS, Radio, PSTN
-
In the event that the primary communications path is
unavailable, Secure-Com selects an alternative communications
path for transmission
-
Redundancy of communications paths greatly increases
the system availability for alarm transmission
-
Being multi-path, if the polled system detects a fault
in the network then this path can be automatically bypassed
and another path established
Polled frequency
- 90 second polling
- 1 hour polling
- 4 hour polling
Secure-Com Web Interface
The Secure-Com data base service is a monitoring GPRS facility for Secure-Com Bureau’s. Real time information is provided such as raw data , signal strength and polling data.
Simple to use and updated in real time. The benefits are plain and simple to see, no more waiting on the phone to get information or data from the control.
- Updated in real time
- Fantastic for installers and monitoring staff
- Access Secure-Com data from any PC this includes checking signal strength , polling and alarm data
- All poll data is available for review
- Easy to use access to all Secure-Com data
- Exclusive to Secure-Com GPRS control rooms
One Solution
- A GPRS enabled SIM card is provided with the Secure-Com
unit.
- All GPRS call costs are included in a fixed monthly charge
from your Central Monitoring Station
- No mobile contracts
- No separate mobile phone bills
Secured Communication

|